SUMO 2" Lift Kit and Rear Sub Frame Spacer Kit F2R4SA5
Complete Front and Rear Block Set
These 2.0 Inch blocks attach to the top of the struts, in effect lowering the struts mounting point. The strut mounting locations have been offset to maintain the true geometry of the strut location (Caster and Camber corrected). This means all the factory alignment settings are maintained and no use of "Camber Bolts" are required.
By installing the Rear Sub-Frame Spacer Kit (sold separately) you retain the proper arc of the rear wheel / bearing housing (knuckle / spindle). This prevents the rear tire moving forward and keeps it "centered" in the rear wheel well.
Kit is manufactured from Plasma Cut, 3/16 (.188) thick Steel and Professionally MIG Welded. Includes all hardware for installation.
Powder Coated our Standard Bright Yellow or Custom Colors are available for an additional charge.
*****For ideal installation we highly recommend you purchase the Sumo S3 Rear Subframe Spacer Kit. This kit includes the Sumo Trailing Arm Spacer and relocates the rear subframe and trailing arms to maintain the factory alignment settings.
*We suggest you inspect all suspension components thoroughly when installing this kit. Specifically the struts, ball joints, tie rods, axle boots, etc.
*This kit will require a proper alignment when finished.
*Kit must be registered with our warranty department once installation is completed or warranty will be void.
*By purchasing this kit you accept full responsibility.
*As with all of our products we advise they be installed by a "qualified" installer. If you lack the proper tools, knowledge, ability, and common sense, PLEASE FIND A QUALIFIED INSTALLATION FACILITY!